Nissan Pickup Swirl Control Valve Q&A Location, Solenoid, DTC

Swirl Control Solenoid Valve. Solenoid Valve vs Control Valve What's the Difference The swirl control valve control solenoid valve responds to signals from the ECM All good? Ok so first off, you want to find the Swirl Control Valve Solenoid.

Swirl control valve solenoid receives power from a 10-amp fuse in the relay box The Swirl Control Solenoid Valve is controlled by signals from the PCM

P1130 NISSAN where is the swirl control valve control solenoid valve

When the ECM sends an OFF signal, the vacuum signal is cut and the swirl. Now I've heard from one or two people that this could be due to a low coolant level, however, I don't know how true that is If the only code you have is the P1130, then the likely cause of the problem is just as the code reader says, the "Swirl control valve solenoid valve" which is the part I have listed.

Solenoid Valve vs Control Valve What's the Difference. The possible causes include a faulty swirl control valve control solenoid valve, open or shorted circuits, or a faulty swirl control valve actuator. When the ECM sends an ON (ground) signal, the solenoid valve is bypassed to apply intake manifold vacuum to the swirl.

P1130 NISSAN where is the swirl control valve control solenoid valve. This solenoid valve is actuated by the engine control module ( ECM ) This can be identified by the Engine Light or Service Engine Soon Warning Light turning on